Submersible fountain pump with different delivery heads, adjustable flow control. Perfect for indoor or outdoor use. Compact design, quiet, safe and long lasting. High efficient-save on operating cost. Completely Non-corrosive.
Holinpump Model HL-210
Watt 2.5W
Hmax 45-50cm (1.48-1.64Ft)
Flow rate 200L/H(52.8 G/H)
Flow control Yes
Outlet connection 8mm, 13mm
Size 41X38X32 mm
Approved GS, CE, SAA
Operateing Voltage 120V, 220-240V
Frequency 50/60Hz
Complete Scuba diving, power saving and durablity, and safety hyperstatic
Usage for circulation pumps
1. Fountain
2. Aquarium
3. Garden/Farm irrigation
4 Aquarium Small fish pond
5. Water supply for remote ares etc all water feature system
6. Koi pond and all other water features due to the advanced technology used in our pump
Our Pump Feature for circulation pumps
1. Perfect for indoor or outdoor use.
2. Compact design, quiet, safe and long lasting.
3. High efficient-save on operating cost, and energy saving up to 50% than before
4. Completely non-corrosive
5. It has good waterproof, high dielectric strength
6. Pumps are suitable for fresh & saltwater environments
SAFETY INSTRUCTIONS
Holinpump pumps are carefully inspected and tested to insure both safety and operating performance; However, failure to follow the instructions and warnings may result in pump damage and/or serious injury.
Warning
1, Risk of electric shock is certain that it is connected only to properly grounding-type receptacle.
2, Do not connect to any voltage other than that shown on the pump.
3, Do not pump flammable liquids
4, To reduce the risk of electrical shock, use only on portable self-contained fountains no larger than 5 feet in any dimension.
5, Do not use with water above 35C (95F).
6, Operate pump completely submerged for proper cooling.
7, Not for swimming pool.
Clearing
1, To clean the pump, remove the back cover and the impeller.
2, Use a small brush or stream of water to remove any debris
IF THE PUMP FAILS TO OPERATE, CHECK THE FOLLOWING:
1, Check the circuit breaker and try another outlet to ensure the pump is getting electrical power.
2, Check the pump discharge and tubing for kinks and obstructions. Algae build up can be flushed out with a garden hose.
3, Check the inlet to ensure it is not clogged with debris.
4, Remove the pump inlet to access the impeller area. Turn the rotor to ensure it is not broken or jammed.
5, Monthly maintenance will add to your pump's life
6, We guarantee our products for a period of 12 months
| Model |
HL-210 |
| Watt |
3w |
| Hmax |
50cm(1.6Ft) |
| Flow rate |
150L/H(40G/H) |
| Flow control |
Yes |
| Outlet connection |
8mm |
| Size |
37x37x29 mm |
| Approved |
GS, CE, SAA |
| Operateing Voltage |
120V, 220-240V |
|
Audited Supplier 
){kind=link}
){kind=link}